I asked him what color he wanted to paint it, and first he said rainbow stripes. I told him that was beyond my painting skills. He asked if we could do stripes at all, and I conceded that stripes on the top might be possible, but the bottom would have to be all one color. He chose black, white, and grey stripes on top, with a black bottom. First though, we had done a google image search for striped desk, and found this one. It satisfied my son's desire for rainbows, but made me want to cry at the thought of taping off all those stripes. After reading the blog, and learning it was all done with tape, I was almost willing to give it a shot, but decided that without a glass or fake glass top, the edges would get gummy too quickly in our house. So on to black and white it was. I took the desk outside to begin sanding it down, and found some bonus items in the drawer! Potentially useful items included several lighters, some mini-cigars, and a screwdriver. Neither of us smokes though, and the lighters were empty, but hey, the screwdriver works! And I have always been of the opinion that you can't have enough screwdrivers. There was also a lonely poker chip, and scorecards from an unidentified game. Off to the trash went everything but the screwdriver.
I chaperoned my son's field trip one morning, then had the rest of the day off, so started things off. I gave everything a good sanding, and then just jumped in. The black took 3-4 coats. The white top took 3. I sort of messed up the white top at first, when I inadvertently went back over a coat that wasn't all the way dry. The brush pulled up some of the paint, and there were gummy paint strings all across the top. I walked away for about an hour, then came back and sanded those down, and started the next coat. When my son saw it, he was immediately mad, thinking I was not going to do the stripes. I explained that it was easier to do the base all one color, then paint the stripes on that, rather than try to do stripes of every color. He seemed satisfied. He also changed his mind about the grey, and decided just black and white would work.
After a bit of discussion regarding how wide the stripes should be, he decided they should be exactly the width of the painter's tape. Made it easy for me, as I just cut two small tabs of tape that I then moved down the table as I added strips of tape across the desk. No tape measure needed! I started painting, and my son was skeptical. He thought it would all end up black. He liked it when we pulled off the tape to reveal the stripes. There were some areas where the black paint bled under the tape, but nothing too bad. Some of the spots I touched up a bit with a small brush and the white paint. If I knew I was doing a stripes project again, I'd go with the heavy duty painter's tape, but I just used the roll I'd bought when I painted the door.
With the paint on the top and base done, it was time to paint the drawer. I thought I'd paint it white, and do the pulls black, but my son disagreed. He waned the drawer striped too. I was not about to try to paint vertical stripes on the drawer -- too many curves and corners for me to feel confident about taping it. Then he asked if we could do the front rectangle face black, and the surrounding area white. That seemed much less labor intensive, so I agreed. He wanted the pulls black too. I think they blend in a bit too much, and doing them white, or going to the store and choosing some silver or white would have been a better choice, but as he reminded me, it is his desk, and his choice. 
I put a few coats of polyurethane on, and was surprised how hard I found it to get the coats nice and light. No matter how thin I tried to apply it, I ended up catching drips off the side. I may try a spray-on poly next time. But the end result was nice and shiny, and I hope it will help make the desk more cleaning friendly.I moved the desk in to the living room, and now we are on the hunt for a chair to go along with it! I hope my son will enjoy his striped desk!
